Category Archives: Aluminum Fence On An Angle

Property Lines and Fences

Get some solid advice regarding the common question of how close to the property line you should erect your fence.

Deciding exactly where to place your fence can be tough. Before you even consider putting your fence as close to the property line as possible, you will want to ensure you have gathered all the facts needed to help you make the best informed decision. Depending on your area, there might be some very specific rules and regulations about property lines and fences that you are required to follow. For various reasons, certain municipalities and homeowners associations have specified that a fence must be anywhere from two to ten inches away from a property line. This type of rule could make your decision for you and will at least help lead you toward a decision.

Being neighborly

You may also want to check with your neighbors to see if they have similar fence plans or have a reason to be completely for or against having residential or industrial metal fencing so close to the property line. Not only is it polite and appropriate to ask your neighbor for their input or thoughts, but it can also mean saving yourself time and money should there be a reason the fence should not be erected as you would have liked. You never know what information they might have about the line or their plans for a fence in the same vicinity. Going in on the fence together and placing it right on the property line can be very beneficial for both of you!

Safety for every inch

By installing a fence as close as possible to the property line, you can ensure that everything inside the fence is easily containable. Every inch of your land will be safely confined within the perimeters of the fence. This is especially helpful when your property holds a business or factory buildings or large industrial equipment.

Choosing industrial metal fencing will be the first step toward securing your property and everything that sits on it. The second step will be holding in as much of the land as possible with the fence by going as close as legally possible to the property line. Remember that going right on the line—if possible in your area—could mean you must continuously share the fence and its upkeep and associated costs with the neighboring property. If you are in a tricky situation with those around you, it’s best to place it slightly away from the line.

Home life

Whether your property holds your own family’s residence or a multifamily residence such as an apartment building, you will want to have as much room as possible for people to roam freely on the grounds. This is great for recreational activities and lawn care. Mowing the lawn on both sides of the fence can prove costly and time-consuming, whereas having all of the grass in one place to quickly and easily mow can be very beneficial.

There are smaller advantages to erecting your fence as close to the property line as possible, and there are bigger advantages, too. Weigh the negatives against the positives to see if it is worth your time to look into the exact property line of your lot for safety, security and social reasons.

Hills, Slopes and Uneven Terrain

Aluminum Fence on a hillDon’t let a difficult area keep you from installing an aluminum fence. There are plenty of ways to fence in your outdoor space regardless of the circumstances.

Depending on where you live, your home can be on quite uneven ground with hills, slopes, and random corners. Not all fencing materials are created equal when it comes to uneven ground. Aluminum fencing panels can really benefit any type of yard, as long as you install them correctly for the circumstances.

The down-low on slopes

It’s nearly impossible to have a completely flat lot. Uneven terrain comes with the territory of large outdoor spaces. Varying degrees of angles can be easily navigated with aluminum fencing panels.

The main part of an aluminum fence that goes in the ground is the post. With most aluminum fences, there are only posts every so often, with panels in between that don’t necessarily touch the ground completely. That is why this type of fence is ideal for uneven terrain.

Rise over run

For larger slopes, you will need to determine the rise-over-run measurement to ensure your fence posts won’t look incredibly uneven to the naked eye. To do this, you will need a sturdy board the same length as the fence panel (usually six or eight feet long), a tape measure and a level. The key is to find how many inches of difference there will be between one fence post and the next.

Place your board on a sloped area and lift the end of it until a level shows you are perfectly level with the ground. Use the tape measure to see how many inches this end of the board is from the ground. Now you have your rise-over-run measurement for this slopes area.

You will want to use this measurement to get the right fence panels for your specific yard. Mention this to your aluminum fence specialist to ensure you are purchasing a fence that can handle this type of sloped yard, and ask them to explain your choices.

Stepped or raked fence

If your rise-over-run includes a big difference, a stepped fence might be the best solution for your yard.

A stepped fence has the panels placed perfectly level with the ground, with each panel being a few inches lower or higher than the next, creating a stepped effect when you see the tops of the panels all in a line.  However, this will not comply with swimming pool codes and many home owners prefer not having gaps in their barrier which brings us to your 2nd option.

A racked (or racked) fence has the pickets still pointing straight up, but the rails angle to the contour of the slope based upon how much pivoting is done on-site during installation.  Essentially, you can shift the panel to follow the contour of slight, medium and even steep slopes or stairs.

Racked fence is a better option if you are worried about any empty space beneath the aluminum fencing panels. The pickets can stay the same distance from the ground because the rails stay parallel to the slope. This is helpful if you have pets in the yard you need to keep safe and secure.

Whether your yard is only slightly uneven or it has quite a large gradient, there are fencing options for you. You just need to do a little planning and decision making to ensure you know exactly what is right for your space.

Decision Making When Installing Your New Fence

DIY Aluminum Fence Installation
DIY Aluminum Fence Installation

You can install even the toughest aluminum fences available by yourself with the help of easy, no-welding fence panels sent right to your door.

It’s easy to presume that a professional needs to take care of the tougher home improvement jobs, such as erecting a strong fence around the perimeter of your property. Thankfully, with easy-to-install panels and posts and /or mounts, sound advice and a few tools and planning, you can be well on your way to installing the fence of your dreams.

Why install your own fence?

Whether this is your first or 50th home improvement job, you can still install a fence with the right tools and planning. When you’re the one installing it from start to finish, you have full control over all aspects of the project.

For a commercial or industrial fence, it’s great to have this control so you can be sure your business and property are fully taken care of. Security will be at the forefront of every decision you make, so you will be able to choose locks, pocket size and material strength to match your needs. For a residential fence, you will be pleased to have full control over the decor, size and placement of your fence.

Maximum quality with minimal cost and upkeep

When installing an aluminum fence yourself, you can choose to have the pricier additions right away or perhaps install those later. Because you will be the one putting in the work, you’ll know exactly how to change any aspects of the fence in the future. Customization is another area you have full control over. You can choose to have your company’s logo placed on the driveway gates or entry gate, or you can choose colors that match your product or building’s exterior. Having full control over every choice is a great reason to DIY your own fence.

You might believe that a customized aluminum fence for an industrial, commercial or residential property would be incredibly expensive, but it really can be quite affordable. Doing it yourself might give you a few frustrations along the way, but the savings you’ll make and the fact that you’ll end up with the exact fence you want in the time frame you want is enough to make you consider doing every home improvement project on your own.

Planning it out

If you have a unique space that needs to be fenced in or very specific needs when it comes to your property, installing your fence yourself can ensure you have exactly what you need. If something is misaligned or installed incorrectly the first time, you can fix it with ease knowing exactly what to do. A little planning and research goes a long way if you’re new to home improvement work. Contacting the company where you purchased your fence panels and asking any questions you may have can help. They’ll be happy to give you advice to help you with your residential, commercial or industrial fence project.

In case you’re worried about the installation process, you’ll be pleased to know that you don’t need any fancy tools or machinery to get the job done. There are fence panels of every thickness that do not need any welding on-site and can be easily trimmed to fit any space with a saw. It’s as easy as that! This means you can have a high-quality, low-maintenance fence that you can install on your own, fully customized however you please. You’ll end up feeling very satisfied with the hard work you’ve put in to get the result of your dreams!

Keeping Your Yard Safe For Everyone

pool-fence-safetyChildren, pets and your own property are all vulnerable when outdoors. Let your fence do the hard work of keeping everyone and everything safe!

Any outdoor space is hard to keep exactly how you want thanks to weather conditions and other outside forces, but keeping your yard as safe as possible is usually at the top of everyone’s list. From children to pets to your property, there is plenty to keep safe in your yard at any given moment. Having the right fence, driveway and gates is key in keeping your home and family safe and secure.

Keeping children safe

Children play in their front and back yards and love to have space to run around. Having a fence as a boundary for them keeps them from running into the street. It also helps prevent people and stray animals from entering the premises while the children are outdoors. For added safety and security, you can install privacy panels on your aluminum fence to keep prying eyes out.

One important aspect to remember is your driveway and the entryway to the house. Having a fence with a large area where cars drive into the property means it is not fully secure. At the end of your driveway aluminum gates are an important addition, and you should have a suitable locking mechanism in place so that children do not end up placing themselves in danger.

Keeping your pool area secure

Your home or property may also include a pool or another body of water, which can spell danger in the blink of an eye. This is where a fence can be useful. Having your pool blocked off to prevent people from accidentally falling in not only helps eliminate unfortunate situations but is the law in many towns. Check your local municipality to see what rules and regulations are in place in your area to keep your family and the whole neighborhood safe when it comes to pools.

Keeping pets safe

Like children, pets also need to be kept safe while in your yard or on your property. Driveway aluminum gates also help in this instance, as there will be no area of the yard unguarded from which the pet can escape. To aid in keeping pets safe, you can choose to have puppy panels put on the lower part of your aluminum fence and gate. These panels have narrow spaces between pickets to ensure your pet does not find a way to squeeze through. Another option is expanded metal, mesh, which makes it even harder for any animal to get in or out of the yard. Another way to keep pets and others safe is to have your mailbox located on the outside of the driveway aluminum gates. This allows the mailman to safely put your mail in without upsetting your outdoor pet.

Staying safe from outsiders

A big concern when it comes to the safety and security of your fence is keeping unwanted intruders out. Any type of fence is a great deterrent, and aluminum is extremely strong and effective. You will want to ensure you have high-quality locks on all entry points to help keep the perimeter secure. Whether your gates slide open and closed or swing out and in, ensuring they can only be accessed by those who know a code or have a key will help keep you, your family and your property safe and secure.

Tricky Yards And Random Spaces

Aluminum Fencing for HillsWhether you have a private area you need to keep secure or your yard is on a steep incline, there is still a way for you to enjoy an aluminum fence.

Some properties come with unique qualities that make erecting a fence quite difficult. Perhaps you have a very rocky yard with larger rocks right where you need to put a fence post, or maybe you are hoping to erect an industrial aluminum fence around your place of business but you need to leave space for multiple driveways. Perhaps you need to fence in a very inclined yard but aren’t sure if aluminum is right for you. Whatever your situation may be, you can rest assured there is a fencing solution for your yard.

Slopes and hills

The most common tricky yard situation includes steep inclines. Not all fence types are ideal for slopes and hills, but aluminum fences can handle these ground differences with ease. The vertical style of a residential or industrial aluminum fence means it can handle any slope. For racked fencing, the key is to ensure the rails at the bottom and top stay parallel to the ground and the pickets or panels themselves stick straight up into the air, completely parallel to each other.

Do not make the mistake of putting the posts and pickets on a slant to go with the hill. They should all be parallel, with one next to the other. You just need to ensure you are choosing the correct height for what you need, which may change depending on the slope. Another choice that may work better for you is stepped fencing, where a few sections or panels of fence are next to each other, with the tops making a sort of step design. With this design, the bottoms of the panels may have triangular gaps in some parts and not reach the ground completely.

Tight corners

Thankfully, the corners of your yard can also be fenced in with ease, even those tricky corners where two sides come to a point with a very narrow space between them. This type of property line can happen for a myriad of reasons, but there’s no need to worry. Some people elect to bypass the corner altogether and stop the fence a bit short of the corner to help with mowing the lawn in the future. If you must keep a tricky corner, just be sure you aren’t leaving too much space from that post to the next to give it a symmetrical aesthetic. Aluminum fences in tight corners look quite pleasing compared to chain link or wooden fences, which can both look a bit busy in tight spaces. The vertical nature of the aluminum fence helps the look of the fence.

Hidden areas

Another tricky scenario that could occur while fencing in your commercial, industrial or residential property occurs when you have areas of the yard that you wish to keep hidden. This may be the area of the property that houses trash and recycling, or it could be an area that needs to have a bit more security and shouldn’t be viewable from the outside. To accommodate this, you can choose to have privacy panels put in that block the view of whatever is inside. This can be helpful for aesthetic or security reasons. No matter how your yard is laid out, there will be a fencing solution for you.

You Can Install an Aluminum Fence in Almost Any Configuration

Aluminum fencing panels are nothing if not versatile. You can install them at all but the most extreme angles. On top of that, slopes rarely present a problem.

Aluminum fence panels are easy to install, and they make short work of just about any configuration or terrain. It’s hard to imagine another fence material that matches aluminum’s versatility.

No Trouble with the Curve

Curves and angles present no problem if you’re installing aluminum fencing panels. You can work with angles in two ways depending on the degree of the angle.

You can use our normal pre-punched posts with smaller angles. Use a standard line post to make an angle of 8 to 10 degrees from a straight line simply by flexing a panel in the desired direction and attaching it to the post. That is equivalent to a fence angle of 170 to 190 degrees, which is just a slight deviation from a straight run.

You can use the same technique with a corner post to make angles that exceed 10 degrees. Corner posts are pre-punched so you can make a right angle. You can flex the panel a bit in one direction or the other to realize an angle in your fence of 80 to 100 degrees. You can simply pull your fence panels to the desired angle and then set them to the post.

You can accomplish almost any other angle using our swivel mounts. You can make an angle of up to around 35 degrees by using a swivel mount on one side of a post. Use swivel mounts on both sides to make a 70-degree angle. There are few angles you can’t make with aluminum fence panels, but note that you can’t use end posts for these applications.

Slopes

Slopes are no challenge for aluminum fencing panels. You can erect an aluminum fence on any sort of hill or slope with no problem.

You can go ahead and use our normal fence panels on slopes with a rise of 6 inches or less per fence panel. In this case, you can just use our usual pre-punched posts at the corners and ends or in the fence runs. We sell optional mounts for use with your own posts or to terminate a run on a vertical surface.

Black Aluminum Fence on a hillWe sell rackable aluminum fencing panels to accommodate steeper slopes. Our rackable fence panels work with a rise of 6 to 20 inches per panel. You can use our standard posts in this case. Once again, we have optional mounts for use with your own posts or to end a run at a wall or other vertical surface.

You will need our heavy rackable aluminum fencing panels for steeper slopes. With these, you can erect a fence on a slope that rises as much as 36 inches per panel. In this case, you’ll need our blank, non-punched posts, and you’ll also need to use swivel mounts.

With rackable fence panels, you can’t order certain options. These include dog panels and ornamental rings. You also can’t order rackable versions of our styles 7 and 8. However, you can rack these styles up to a rise of roughly 15 inches per panel. You’ll need to employ stair stepping for steeper runs. For this, you will have to trim a 4- or 6-foot panel to make short panels that you can stair-step up a slope. You should punch out end posts or non-punched posts in this case.

Installing Aluminum Fence Panels at Unusual Angles

Aluminum Fence Swivel Mounts horizontal_swivel_mounts_2
While lots of yards are bounded by nothing but 90-degree angles, yours might not be one of them. That’s not a problem. Unless the angle is incredibly extreme, you can use our horizontal swivel mounts to erect aluminum fence panels to fit it. These flexible mounts make it easy to work with angles.

Hail the Swivel Mount

The key to accommodating angles is the horizontal swivel mount. These flexible mounts make it very simple to put up aluminum fence panels in pretty much any configuration. Our horizontal swivel mounts are cast from an aluminum alloy that will not rust. Furthermore, these mounts are sold in the same colors as our fence panels, so your fence will look great.

Note that we are talking here about horizontal swivel mounts. We also sell vertical swivel mounts, which are used to run fence panels along slopes. Be sure to get the right mounts for your application.

You can use our horizontal swivel mounts by themselves to make many angles, and you can make all but the most extreme angles if you use two in combination. We design our swivel mounts so that you can mount them to any surface, so you’re covered if you need to attach them to a blank post, column, or the wall of a building. Note that these swivel mounts are not made to work with pre-punched posts. Keep this in mind when you design your fence project and order the materials.

When you order a swivel mount, we toss in a pair of Tek screws. Use these stainless-steel screws for securing a blank post and the swivel mount. These screws may not work when mounting to other surfaces, such as walls, in which case you should buy some longer anchor screws locally. It’s best to just wait for your delivery and assess the situation before buying additional materials.

You will need two swivel mounts for each horizontal rail in your fence panels. The number of these rails can vary depending on the style of fence you’ve ordered. If you have three horizontal rails, you’ll have to get six swivel mounts per panel. Similarly, you should get four swivel mounts for an aluminum fence panel with two horizontal rails.

If you’re making a very small angle that is smaller than 10 degrees, you do not need to use mounts; our prepunched line, corner, and end posts allow you to angle our aluminum fence panels slightly, prior to setting them.

Installation

Swivel Mounts can be mounted to one side of your post or to both sides of your post.  Each side, that is each mount-to-post connection, gives you up to about 35 degrees of angle, so you can get up to around 70 degrees mounting swivel mounts on two sides of a 4-sided post.

Remember that end posts aren’t going to work to make angles with horizontal swivel mounts. That’s because they’re pre-punched near the top, which prevents you from properly aligning swivel mounts on one of the other three sides because of the post cap.  Always use blank, non-punched posts with swivel mounts for angles.

How to Install Aluminum Fence Panels at Angles and on Stairs and Slopes

When you’re installing your aluminum fence panels, curves in either the vertical or horizontal plane are no problem. You just need the right product, and often the standard product will fit the bill.

S6_3rails_STANDARD.1S5_3rails_Heavy_Rackablestair_step_7_2016horizontal_swivel_mounts_2

Standard Versus Rackable Fence Panels

If you’re looking at a modest slope that rises six inches or less for each panel, standard fence panels will work. It doesn’t matter if you’re putting up an industrial aluminum fence, a residential fence or a commercial fence. For steeper runs, you’ll need our rackable aluminum fence panels. These panels have a wider hole at the picket-to-rail connection, and they work well with a rise of up to 20 inches per panel. Our standard pre-punched posts will work fine for this application, and we have mounts you can use if a panel abuts a structure or column or if you’re using your own wood posts.

Heavy rackable fence panels can handle a rise of up to 36 inches per panel. That’s a lot! You can’t use our normal, pre-punched posts with heavy rackable fence panels because the points of contact won’t work with the typical insert and set method, nor can you use standard mounts. You’ll need to order our blank, non-punched posts along with vertical swivel mounts and mount the angled rails to each fence panel.

With rackable aluminum fence panels, you have a few limitations.  If you’re adding the dog panel, you can only obtain a medium rack for medium slopes up to 15 inches per 6 foot wide panel.  Similarly, if you’re adding the optional, decorative rings/circles, you can only obtain a slight rack for slight contours and slopes up to about 4 inches per 6 foot wide panel.   Styles 7 and 8 with double pickets also limit the amount of racking you can achieve in a fence panel because at some point the vertical pickets will touch and prevent the panel from racking further.  You can, however, get about 12 – 15 inches per panel from these 2 fence styles.   If you want to use Style 7 or Style 8 on steeper slopes, you’ll have to stair-step the panels by attaching 2 panels to 1 post at different heights.

Stair Stepping

Stair stepping sounds like some kind of country dance, but it’s actually the practice of running shorter panels horizontally up hills or stairs. You make the shorter panels yourself by cutting panels down to size on-site. This is not hard to do with an electric saw or hacksaw. You run these short panels up the slope or stairs in a staggered pattern, fastening them to posts at different heights on each side. You can use end posts, but people usually buy non-punched posts and punch them out on-site.

Angles and Curves

You can install residential, commercial and industrial aluminum fence panels at almost any angle you want. You will use one of two options depending on the angle.

For small angles, you can go with our regular pre-punched posts. You can set a fence panel at an angle of 8 to 10 degrees by just angling it as you like and setting it with regular line mounts. This means you can run your fence at an angle of 170 to 190 degrees.

You’ll need a corner post for larger angles. The corner post is pre-punched to accept fence panels at right angles, allowing you to make an angle of about 80 to 100 degrees in your fence.

You’ll need horizontal swivel mounts for other angles. These can handle up to 35 degrees per panel-connection, which is enough to run almost any angle, especially if you use a swivel mounts on both sides of a post.

No Matter the Fence Shape, We Cover all the Angles

It would be very easy if every piece of land were a simple rectangle, but the world is not that simple. The good news is that you can install aluminum fencing panels in almost any conceivable shape. Some flexible fence mounts can help accomplish nearly any job.

S6_Angles

Swivel Mounts to the Rescue

Horizontal swivel mounts make it easy to install aluminum fence panels at almost any angle. These are made from cast aluminum alloy. They won’t rust, and you can buy them in the same color as your fence panels. When used alone or in combination, horizontal swivel mounts and regular straight mounts can make just about any turn that’s not a right angle. You can mount swivel mounts to any surface, such as a structure or column, and you can mount them to our blank posts and end posts. That last part is important; you will not be mounting your swivel mounts to pre-punched posts, so order accordingly.

We include a couple of stainless-steel Tek screws to attach a swivel mount to a blank post. You’ll need to go elsewhere and buy longer anchor screws if you’re attaching the mount to some other surface. If possible, wait for your order to arrive to determine what is best.

You should order two swivel mounts for each horizontal rail in the fence panels you’ve selected. For example, you’ll need four swivel mounts if your fence panels have two horizontal rails, and you’ll need a blank post for each angle. Similarly, with three horizontal rails, you’ll need six swivel mounts plus one blank post.

You can make slight turns of less than 10 degrees using standard mounts, in which case you can get pre-punched posts.

We sell both horizontal and vertical swivel mounts. You should opt for horizontal swivel mounts for angles rather than vertical swivel mounts, which are used for steep slopes.

Installing Your Angled Fence

You should choose normal, pre-punched posts and straight mounts for angles that are smaller than 10 degrees. Just insert the horizontal rails of the aluminum fencing panels in the holes in the post. Turn panels as needed to accomplish the angle, and then set the panel-to-post connection with the self-tapping screws that come with your order.

You can make a connection of around 30 to 35 degrees with a single horizontal swivel mount, and using two of these allows you to make an angle of up 70 degrees or so. It does no harm to use two horizontal swivel mounts, so if you’re not sure about the angle you’re making, just use the two swivel mounts to be on the safe side. You should also use two horizontal swivel mounts when installing a circular fence, unless it is a really big circle.

For moderate angles, you can mount panels to either side of a post using swivel mounts on one side and straight mounts on the other side of the same post. For bigger angles, use swivel mounts on both sides of the post.

Note that you cannot use end posts for angles. These are pre-punched near the top, and you won’t be able to align the post properly with the fence panel.

Using Aluminum Fence Panels for Slopes, Stairs and Angles

Aluminum Fence panels can be configured for slight, medium and steep slopes and stairs., and you can accommodate almost any possible angle if you have the right hardware.

Do you need to mount a fence on a sloped surface? That’s not a problem. From a modest slope to a steep hill, you can easily install aluminum fencing to secure your property.

Standard and Racking Fence Panels for Hills or Stairs

You can use standard fence panels on slopes with a rise of 6 inches or less per panel. You can use standard pre-punched posts for corners, ends and lines in this case. Mounts are available to secure your fence to a structure, column, wall, or user-provided wooden posts.

Rackable fence panels can be installed straight or shifted on-site for medium slopes. You should use these when you have a rise that is between 6 and 20 inches per panel. Again, you can use standard posts to connect the fence panels. You can use optional mounts to secure these fence panels to structures, columns, wooden posts and walls.

You will have to use heavy rackable fence panels when dealing with a rise of up to 36 inches per panel. With these panels, you will have to use blank, non-punched posts and vertical swivel mounts. These are sold separately.

Note that rackable fence panels do not accommodate dog panels, nor can they be obtained with ornamental rings at the top. Rackable fence panels are also unavailable in styles 7 or 8, which have 2x pickets with a flat top and spear top, respectively. Also, styles 7 and 8 can only be used with racking of up to about 15 inches per panel and must be stair-stepped on steeper slopes.

Stair-Stepping Fence Panels

You can also stair step aluminum fence on a hill or slope.  The fence panels use a staggered design, which means a panel will fasten to a post at a different height than the adjacent panel. It’s possible to use end posts for this purpose, but it is often preferable to use non-punched posts and punch them out on-site.

Aluminum-Fence-Stairs

Angles and Curves

You can install aluminum fencing to accommodate almost any angles or curves on your property. There are two options depending on the size of the angle.

Use standard, pre-punched posts if you have smaller angles, and be sure to use a line post in this case. You can set a fence panel at an angle of 8 or 10 degrees by turning it to the appropriate angle and attaching it to a standard line or end post. This is equivalent to an angle of up to 170 to 190 degrees in your fence.

Wider angles call for a corner post, which is pre-punched to accept fence panels at right angles. Again, you can move a panel to about 10 degrees out of line, which means a corner post can handle angles of about 80 to 100 degrees.

For other angles, you should use swivel mounts on one or both sides of a post. In extreme cases, swivel mounts on both sides might be necessary. This will allow you make pretty much any degree angle that you need.